This is a print preview of the page.

Netherlands
+31(0)30 2484848
Belgium
+32(0)9 2530509
E-mail
info@contimeta.com

Add-on equipment and self loaders

Modular tacking heads

Series 230/240
This Series has proven itself in the manufacture of furniture, packaging, building elements and in prefabrication. The heads are extremely compact. As a cartridge system and accessories, this series has proven itself to be best where staples in lengths ranging from 3 through 40 mm had to be processed. Also where pins ranging from 10 through 62 mm had to be tacked, this series proved to be the most productive. When a module is mounted on a robot for a load station system, extremely large loading capacities of up to 20.000 staples can be achieved.

Series 260
Apart from weighing very little, this series is extremely powerful. Several technical novelties makes this device unsurpassed in economy. One very special feature is the interchangeable casettes, enabling the rapid loading with various tacking products. Benefits include the guaranteed tacking frequency of 6 staples per second, and it is not necessary to adjust anything when various staple lengths between 38 and 65 mm are used.Electronic monitoring of the cartridge as well as verification whether bonding actually took place, are optional possibilities. The tools are simple to include in existing systems, also because of their small size. Width 100 mm, length 454 mm. It weighs max. 7kg.

Series 280
This serie is used mainly when staples of 50 tot a maximum 80 mm need to be used. It is also possible to use the module for nails from 50 to a maximum 100mm long. It is possible to build this into fully automatic pallet machines. Here too, there is an option available to monitor the cartridge as well as confirmation whether the bond actually did take place. The trigger action can be controlled both pneumatically or using 24 Volt DC, enabling PLC control.

With every definite request, we visit the site where the machine needs to be fitted. A drawing with built-in dimensions is always
provided.

235/245/265 Long cartridge

235/245/265 Long cartridge

For all types of staples from 3 - 80 mm long.

  • div. nozzle length options
  • tacking signal 24V DC
  • cartridge inspection
  • flange fitting M30 x 1,5

230/240/260 Top-loader

230/240/260 Top-loader

For all types of staples from 3 - 80 mm long.

Cartridge capacity to 5000 Staples.

options:

  • tacking signal 24V DC
  • cartridge inspection
  • continuous self-loading

232/242/262 Side loader

232/242/262 Side loader

For all types of staples from 3 - 80 mm long.

Continuous action.

Cartridge capacity to 5000 staples.

options:

  • tacking signal 24V DC
  • cartridge inspection
  • continuous self-loading

Cartridge as an interchangeable casette

Cartridge as an interchangeable casette

With this option, the cartridge can be separated from the device and topped up. Thus enabling rapid reloading of various tacking means.

BeA Inbyggnadsverktyg Långt Magasin Clinching-Unit

BeA Inbyggnadsverktyg Långt Magasin Clinching-Unit

Magasin kapacitet:
300 - 500 klammer (ca)
Benlängden: 4 - 25 mm
Viktigt att veta:
Kan fås med kontakt eller fotpedal
Handsfree drift
Applikationer:
Emballering, blåsförpackning

Coilnail-unit Stationary for Jumbocoils

Coilnail-unit Stationary for Jumbocoils

To 2200 nails per coils.
Larger cartridges possible.

BeA Inbyggnadsverktyg spik med D-formad skalle

BeA Inbyggnadsverktyg spik med D-formad skalle

Magasin kapacitet:
Upp till 140 spik
Benlängder: 50 - 100 mm
Viktigt att veta:
Justerbar magasin kapacitet
Lång livslängd
Applikationer:
Prefab hus, möbelramar, lastpallar och spjällådor.