This is a print preview of the page.

Netherlands
+31(0)30 2484848
Belgium
+32(0)9 2530509
E-mail
info@contimeta.com

Glue guns and Hotmelt systems


Hotmelt systems are made for processing polyamide and thermoplastic gluing. Contimeta provides glue guns for the processing of sticks in 12 and 43 mm, at an output to approximately 4 kg per hour. Glue guns and hotmelt appliances are available for both strip and spray application. They are fitted with a thermostat for accurate regulation of the temperature to be used.

The hotmelt hardens after application in 5 to max. 180 seconds, depending on the type of hotmelt used. No waiting period, no drying time and no mess. Polyamide melting glue is available in amongst others super stick, multi stick, poly shot. Contimeta provides fully automatic stationary hotmelt systems for granulate in the form of loose grains or tablets.

Glue gun Gas-tec 600

Glue gun Gas-tec 600 Glue gun Gas-tec 600 Glue gun Gas-tec 600 Glue gun Gas-tec 600

A very comfortable glue gun to use on gas technology.

The gas-tec 600 is a totally portable, robust compact hotmelt glue gun that runs on butane gas. It does not require mains electricity or batteries
but operates using easily refillable LEC (Liquid Energy Cells) power technology. The gas-tec 600 has been built to a very high standard and incorporates a soft-feel handle and full-hand trigger, making it a very comfortable gun to use.


  • Cordless glue gun - operates using easily refillable LEC™ (Liquid Energy Cells) power technology.
  • Comes complete with 2 empty LEC™ cartridges, each giving approximately 1½ hours of use. (Spare cartridges available for purchase).
  • Refillable using standard cigarette lighter canisters.
  • Comfortable to use thanks to its soft-feel handle and full-hand trigger.



Specifications

  • Capacity: 1,7 kg/hour
  • Type glue: Superstick
  • Voltage: Gas powered
  • Wattage: 185 W
  • Heater: Catalytic
  • Temp control: Thermostatic gas valve
  • Hot melt gun °C (°F): 195 (380)
  • Weight: 390 gr (14oz)

Glue gun Tec 305-12

 Glue gun Tec 305-12

Comfortable and easy to use!

The Tec 305 lightweight, professional glue gun offers unrivalled reliability, ease of use and exceptional adhesive melt rate for a glue gun of this size.

High quality, self-regulating heaters control the glue gun temperature and is designed to provide years of trouble free service. Suitable for schools, colleges and out-workers where a safe, reliable glue gun is essential.

Ideally suited to applications where small quantities of adhesive are required repetitively in product assembly, packaging, and general use.


Specifications

  • Reaches full operating temperature in just 5 minutes.
  • Glue output of over 750 grams (1½ lbs)/hour.
  • Narrow profile aids visibility, allowing molten glue to be placed with high accuracy.
  • Voltage: 110-240V
  • Fitted with eco efficient self regulating
    30W (250W) heaters.
  • Adjustable full-hand lever trigger for
    optimum comfort.
  • Multifunctional detachable base stand includes a nozzle
    wrench and stores the trigger-stop adjustment screw.
  • Illuminated ON/OFF switch.
  • Weighs only 230g (8oz).
  • Designed to use standard 12mm (½”) Tecbond high performance hotmelt glue sticks.
  • The tec 305 is built to comply with worldwide
    industrial and electrical safety standards and is covered by a full one-year warranty.


Also available in Low temperature model: Tec 305 LT-12

Glue gun Tec 805-12

Glue gun Tec 805-12 Glue gun Tec 805-12 Glue gun Tec 805-12 Glue gun Tec 805-12

Economical mid-range for 12mm glue, Industrial use


Specifications

  • Fantastic output for an applicator of this size.
  • Low cost.
  • Eco heater chamber design for low power consumption.
  • Adjustable full-hand lever trigger.
  • Available in 12 or 15mm.



  • Economic design with 250 watt self-regulating PTC heater that allows tool to operate on most voltages from 110 to 250 Volt and heat up from cold in just 3 minutes.
  • Adjustable full-hand trigger to dispense 12 mm TECBOND hot melt glue at more than 1.8kgs/hr. TECBOND® hot melts are solvent-free, clean and easy to handle glue sticks that are heated in a compatible glue gun and dispensed molten.
  • Tool has illuminated "ON/OFF" switch and is fitted with a detachable stand that doubles as a nozzle spanner and also stores the trigger adjustment screw
  • Uses standard TECBOND hot melt glue sticks weighs only 450g, fitted with 2 metre power cord and is supplied blister packed


Available in Low temperature model: Tec 805 LT-12

Glue gun Tec 810

Glue gun Tec 810

TEC 810-12 Industrial Mid Range Glue Gun

  • Best seller !
  • Robust, highly reliable, and great value.
  • Soft grip handle and adjustable full-hand lever trigger.
  • Available in 12 or 15mm.



Specifications

  • 230V Voltage.
  • Designed for continuous industrial use.
  • Highly efficient melt chamber.
  • Warm up time of only 2 to 3 minutes.
  • Glue delivery rate in excess of 2 kilos an hour.
  • Temperature control via preset thermostat.
  • Narrow profile handle and soft feel grip.
    Adjustable trigger.
  • Illuminated on/off switch and detachable base stand.
  • Base stand includes a nozzle spanner and stores the trigger stop adjustment screw.

Glue gun Tec 820

Glue gun Tec 820 Glue gun Tec 820 Glue gun Tec 820 Glue gun Tec 820 Glue gun Tec 820 Glue gun Tec 820 Glue gun Tec 820

Need to apply glue at different temperatures? Glue gun Tec 820!

  • Save money by buying just this adjustable temperature gun.
  • Soft grip handle and adjustable full-hand lever trigger.
  • Available in 12 or 15 mm.


Fitted with an adjustable thermostat that changes gun temperature to dispense all TECBOND 12 mm glue including low melt and polyamide.


  • Highly efficient melt chamber gives a glue output of 2.5kgs/hr, within 2-3 minutes from cold start.
  • Tool features a comfortable "soft-feel" full-hand trigger, narrow profile body to improve visibility and a detachable stand that incorporates a nozzle spanner and thermostat adjuster
  • Supplied with a 3 metre power cord
  • Weight: 500g


The TEC 805-12 gun combines quality with cost efficiency and provides a professional mid range gun to be used for most gluing applications.


Specifications

  • Minute fast heat up time.
  • Illuminated on/off switch.
  • Melt rate: 1.8 kg/hr.
  • Multi-function stand acts as a base, a wrench for nozzle replacement, and houses the trigger stop adjustment screw.
  • Voltage: 230 V.

Tec 3200 Glue gun

Tec 3200 Glue gun Tec 3200 Glue gun Tec 3200 Glue gun Tec 3200 Glue gun Tec 3200 Glue gun

A high output glue gun is electronic technology at its best

The high efficiency heater housing, coupled with a solid state adjustable temperature controller, guarantees adhesive at the right temperature just when you need it. The Tec 3200 is supplied complete with an integral gun stand, suspension ring, full operating instructions and one year guarantee.

The ideal tool for product assembly, packaging, sealing, electrical potting and encapsulating. Instant bonding of virtually any material ensures fast, efficient, cost effective production.

The Tec 3200 loaded with two TECBOND 43 mm cartridges can never run out of adhesive, as a cartridge always remains in the glue gun at the right temperature.


Specifications

  • Sturdy hand-held device for 43 mm sticks.
  • Exchangeable thermostat to regulate melting temperature.
  • Automatic standby function.
  • Automatic standby
  • Capacity: 3.5 kg/hour
  • Type glue: Polyshot



Images
1 Increased ventilation and safety nozzle.
2 External thumb wheel for easy adjustment of the plunger release.
3 Indicator lights for power-on and stand-by.
4 Optional plug-in temperature modules.

Tec 6100 Pneumatic Glue gun

Tec 6100 Pneumatic Glue gun Tec 6100 Pneumatic Glue gun Tec 6100 Pneumatic Glue gun Tec 6100 Pneumatic Glue gun Tec 6100 Pneumatic Glue gun

High Output Pneumatic Hotmelt Applicator Tec 6100

  • Extremely robust 43 mm pneumatic glue gun for industrial use.
  • Reduces operator fatigue.
  • Excellent productivity thanks to the high output.
  • Air supply required.


Ideal for fabrics, e.g. gor gluing carpet to steps etc.


Specifications

  • Voltage: 110-120V | 50-60Hz
  • Heater: 2 x 250 watt stainless steel cartridge heaters
  • Temp control: Pre-set thermostat 380ºF & safety thermal fuse
    (420ºF thermostat for polyamide glues & 26 0ºF thermostat for lowmelt glues)
  • Weight: 3 lbs
  • Power cable: 10 ft, three core, rubber sheathed, with plug fitted + air hose with reinforced heat resistant sheathing.
  • Melt rate: up to 11lbs/hr depending on adhesive and temperature
  • Adhesive size: TECBOND 1¾ cartridges



Pictures
1 Enclosed ventilated heater housing and silicone rubber nozzle shroud.
2 Easy load & non-stick piston.
3 Comes complete with integral gun stand.
4 Solid PTFE barrel and power-on warning light.

Tec 6300 Spray Glue gun

Tec 6300 Spray Glue gun Tec 6300 Spray Glue gun Tec 6300 Spray Glue gun Tec 6300 Spray Glue gun Tec 6300 Spray Glue gun Tec 6300 Spray Glue gun

Tec 6300, high quality, configured with spray system.


The TEC 6300 takes only 10 minutes to warm up from cold. Just pull the trigger and the adhesive is melted on demand by the powerful 500 watt heated melt chamber. Adhesive output is controlled by adjusting the air pressure, and the spray pattern is varied by using the rear mounted spray control knob, easy to use by both left and right-handed operators.

  • Extremely robust 43 mm pneumatic spray glue gun for industrial use.
  • Sprays hotmelt at any angle with adjustable spray pattern.
  • Cover large areas with a non-toxic adhesive spray system.
  • Apply hotmelt to heat sensitive substrates without damage.
  • Reduces operator fatigue.
  • Air supply required.



Specifications

  • Temperature: 356°F (180°C)
  • Watts Volts: 500 Watts
  • Heater: Cartridge
  • Glue Stick Diameter: 1 3/4" Glue Slugs
  • Power Cord: 10 ft
  • Capacity: up to 4.2 kg/hour
  • Type glue: Polyshot
  • Weight: 1,4 kg. (about 3 pounds)
  • Power cord: 3 meter.


Ideal for fabrics, e.g. gor gluing carpet to steps etc.

- Metal gun stand available as option.
- Alternative nozzles available.


Images
1 Spray adjustment knob for both right and left handed operators.
2 Spray nozzle for wide area coverage.
3 Fully enclosed heater housing, and power on warning light for extra safety .
4 Easy to load with large 1¾" glue cartridges.

Tec 7100 Glue gun

Tec 7100 Glue gun Tec 7100 Glue gun Tec 7100 Glue gun Tec 7100 Glue gun Tec 7100 Glue gun Tec 7100 Glue gun

TEC 7100, multi load powerful glue gun with pneumatic speed loader

The Power Adhesives TEC 7100 pneumatic glue gun with multi-load cartridge allowing for maximum performance and minimal down time due to reloading.

For industrial use, high volume glue gun that can dispense upwards of 12 pounds/hour.

The TEC 7100 air assist on the gun allows for continuous, fluid dispensing of hot melt with minimal effort by the user. Perfect for high volume applications where extended use is required. The multi-cartridge feeder holds 2 additional glue slugs, which helps reduce loading down time. The TEC 7100 goes through about 80 1 3/4" glue slugs per hour.


Specifications

  • Adjustable Temperature: 265°F - 385°F (130°C, 165°C, 175°C, 195°C)
  • Watts Volts: 1000 Watts, 220 Volts
  • Heater: Cartridge
  • Glue Stick Diameter: 1/2" or 5/8"
  • Glue Gun Weight: 5 Pounds
    Recommended Air Compressor Setting: 120 psi
  • Power Cord: 10 ft.


Pictures:
3 Well ventilated, enclosed heater housing design with dual 500 watt heaters for consistent dispensing of molten adhesive.
4 Unique, built-in speed loader design holds an extra two 43mm adhesive
cartridges in reserve, enabling constant adhesive bonding.
5 Loading takes just seconds; just retract the piston loader, and a 43mm adhesive cartridge drops into place
6 Comfortable, smooth action trigger and integral stand, which can be screwed down on to work surface for extra security.

Tec 7300 Glue gun

Tec 7300 Glue gun Tec 7300 Glue gun Tec 7300 Glue gun Tec 7300 Glue gun Tec 7300 Glue gun Tec 7300 Glue gun

Pneumatic, professional Speed-loading hotmelt Spray applicator

The Tec 7300 is one of a series of new generation pneumatic hotmelt applicators. Probably one of the world’s highest-output hand-held hotmelt spray applicators, the Tec 7300 is a serious alternative to bulk tank hotmelt systems at a fraction of the cost.

This unique, economic hotmelt spray system is ideal for covering areas of up to 2 m2 with one cartridge, and can be used on heat sensitive materials, such as expanded polystyrene and other plastic films and foams.

Operating temperature is obtained in only 10 minutes from cold.


Specifications

  • Voltage: 230V or 110-120V | 50-60Hz
  • Heater: 2 x 500 watt stainless steel heater cartridges (total 1000 watts).
  • Temp control: Pre-set thermostat 195ºC and safety thermal fuse (215ºC thermostat for polyamide glues and 130ºC thermostat for lowmelt glues are available).
  • Weight: 1.5 Kg
  • Standard power cable: 3 metre three core, rubber sheathed, with fitted plug + air hose, with heat and kink resistant
    sheathing. UK, European, Australian, Swiss & USA versions available.
  • Melt rate: Up to 5.25 kg/hr depending on adhesive & temperature Adhesive TECBOND 43 mm Spray Cartridges.
  • Coverage: Between 13 m2 and 50 m2 per kilo, depending on spray pattern.



Pictures:
3 Spray nozzle options for adjustment in adhesive volume, pattern and area coverage.
4 Spray adjustment knob for both right and left handed operators.
5 Unique, built-in speed loader design holds an extra two 43 mm adhesive cartridges in reserve, enabling constant adhesive bonding.
6 Loading takes just seconds; just retract the piston loader, and a 43 mm adhesive cartridge drops into place.

Dot Tec 8200 Glueing device

Dot Tec 8200 Glueing device Dot Tec 8200 Glueing device Dot Tec 8200 Glueing device Dot Tec 8200 Glueing device Dot Tec 8200 Glueing device

Unique Mini Tank Hotmelt Dot Dispenser

The DOT-Tec 8200 is a unique all electric hotmelt adhesive dispenser. It has been designed to dispense full pressure sensitive peelable hotmelt adhesive in repeatable dot sizes of between 7 mm to 30mm diameter. Lines of adhesive can also be formed if the substrate is moved under the nozzle while adhesive is dispensed.

The DOT-Tec 8200 is a unique all electric hotmelt adhesive dispenser. It has been designed to dispense full pressure sensitive peelable hotmelt adhesive in repeatable dot sizes of between 7 mm to 30mm diameter. Lines of adhesive can also be formed if the substrate is moved under the nozzle while adhesive is dispensed.

Specifications

  • Voltage: 230/240V or (110/120V special order).
  • Heater: 600W (2 x 300W long life stainless steel cartridge heaters).
  • Temo control: Preset thermostat 180ºC.
  • Tank capacity: ½ kilo max.
  • Weight: 4.7 kilos (empty).
  • Pump: Manually operated piston pump.
  • Nozzle: 2mm diameter with nozzle valve.
  • Adhesive: PEEL-TEC ½kg blocks.
  • Safety: Designed to comply with European safety requirements.



Pictures:
1 Non-drip nozzle with 11 cm deep throat access.
2 Comes standard with easy pull handle & indicator power light. (can be fitted for left/right handed use).
3 Easy load tank, taking ½ kilo PEEL-TEC adhesive blocks.
4 Screw-in stop allows you to regulate adhesive dot sizes.

Pur Hotmelt Glue gun Tec 1050

Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050 Pur Hotmelt Glue gun Tec 1050

PUR and full pressure-sensitive glue gun TEC 1050


Specifications

  • Cartridge glue gun for peelable, full
  • pressure-sensitive and reactive PUR adhesives.
  • Low cost & easy to use.
  • Cordless with base station.
  • 0-15 minute warm-up time.
  • Power-on and ready-to-use indicator lights.


Pur (polyurethane reactive) hotmelt is applied the same way as the usual hotmelt. For example the PUR hotmelt 1050, suitable for gluing most materials including glass, pvc and metal. This hotmelt is also extremely suitable for use in demanding joints and applications in amongst other the vehicle industry due to the enormous heat and chemical resistance of the hotmelt.

There are two available, namely the TEC 1050 cordless hotmelt device, that works with small 50 gram patterns. Also the TEC 3150, working with conventional 43 mm polyshot sticks. This 300 watt device has a capacity of more than 3 kg per hour and is suitable for professional use.


Specifications:

  • Melt rate: 50g (1¾oz) cartridge / 10 mins
  • Glue size: 50g (1¾oz) CT cartridge
  • Voltage: 220-240 V
  • Wattage: 500 W (14W)
  • Haeter: PTC
  • Temp Control: Self regulating heater 130°C (265°F)
  • Power cable: 1.8M (6ft)
  • Weight: Gun 250g (9oz), base 250g (9oz)



TECBOND® high performance CT cartridges

Formulation: 2169-CT
Description: Peelable hotmelt adhesive for temporary bonds on promotional items
Colour: clear
Open time: permanent
Viscosity: low

Formulation: 2169-CT
Description: Peelable hotmelt adhesive for temporary bonds on promotional items
Colour: amber
Open time: permanent
Viscosity: low

Formulation: 4741-CT
Description: Pressure-sensitive for smooth shiny surfaces, soft flexible bond
Colour: White
Open time: Long
Viscosity: meduim

Formulation: 9010-CT
Description: Polyurethane Reactive hotmelt. Sets hard, maximum heat and chemical resistance
Colour: Clear
Open time: Permanent
Viscosity: Low

Formulation: 9040-CT
Description: Polyurethane Reactive hotmelt. Tough f exible bonds, maximum heat and chemical resistance
Colour: amber
Open time: very long
Viscosity: high

Nordson DuraBlue hotmelt machine

Nordson DuraBlue hotmelt machine Nordson DuraBlue hotmelt machine Nordson DuraBlue hotmelt machine Nordson DuraBlue hotmelt machine Nordson DuraBlue hotmelt machine Nordson DuraBlue hotmelt machine

The ideal machine where one can work full-time at a fixed workplace. The DuraBlue has various settings, ensuring proper product gleuing. Because of its high-quality design, the most reliable in its type.


Specifications

  • all systems are configured with hose/pistol or fixed head.
  • the systems have outlets for an extra second hose or head.
  • Fitted with a gear for 100% constant hotmelt supply.
  • Extensive temperature range adjustable from 40 to 230?C.
  • Improved temperature control using icons.
  • rapid heating up time, possibly using adjustable timer.
  • Safe daily locking using qdjustable timer.
  • Nozzles optionally available from 0,5 through 2,3 mm.
  • Very rapid delivery periods.
  • Service by contract or depending on requirement.
  • Extensive hotmelt advice.