This is a print preview of the page.

Netherlands
+31(0)30 2484848
Belgium
+32(0)9 2530509
E-mail
info@contimeta.com

Nailing Device High-pressure

High-pressure nailing device for metal on metal profiles, steel on steel and wood on concrete.

For demanding Applications, where the standard 8 Bar tacking equipment do not comply, Contimeta can supply the High Pressure system. We find the applications generally in the sectors:

  • construction
  • steel frame construction
  • container building


The High Pressure System works with a high pressure compressor, fitted with a 10 litre tank, that can provide 29 Bar pressure. Per compressor, High Pressure nailing tackers can be attached using special safety coupplings. It is possible to link two standard 8 Bar tackers on the standard coupplings.The compressor is maintenance free for the first 500 hour. The noise level amounts to only 69 dB/A, where an average compressor produces 85 dB/A. The tackers are obviously smaller and lighter than the conventional systems. The HN 25 weighs only 2,0 kg and has a very slight recoil with lots of power! The High Pressure devices are unequalled, especially in steel and concrete. Make an obligation free appointment for a free demo; you will be astounded by the possibilities!

AKHL 1050E High-pressure compressor

AKHL 1050E High-pressure compressor

Properties:

  • With its 25 kg and compact size, simple to relocating at the workplace.
  • High-pressure air tank, 29 Bar 10 litre tank. Comparable with a 50 litre tank 8 Bar compressor.
  • dimensions: 276 x 350 x 600 mm
  • 2 cylinders, oil free
  • Engine capacity: 2 PK
  • 4 Fittings
  • 2 x High-pressure fittings
  • 2 x 8 Bar fittings
  • Revolutions: 2350 rev./min.
  • Suspense: 230 V / 50 Hz
  • Tank volume: 10,4 litre
  • Low noise level, 69 dB/A
  • Suction capacity 95 - 120 litre per minute
  • Inverter Control, ensures that the compressor continues working at a lower voltage (min. 120 volt).

HN 120 Concrete nailer 22 - 65 mm

HN 120 Concrete nailer 22 - 65 mm HN 120 Concrete nailer 22 - 65 mm

Properties:

  • weight 2,9 kg
  • Standard snap fitting
  • Cartridge capacity: 50 nails plastic collation
  • Dimensions: 400 x 85 x 315 mm
  • Operating pressure: 15 to 23 Bar
  • Air usage: 4,7 litre per stroke at 23 Bar
  • Triger-blocking system



Applications, to attach:

  • Metal profiles, wood and floor sections on concrete
  • Wood trimming and metal profiles on walls (concrete, calcium cilicate, brick, steel)
  • Metal profiles, wood and floor parts on steel
  • Floor heating and electro- brackets
  • steel op steel.

HN 25 Concrete nailer 15 - 25 mm

HN 25 Concrete nailer 15 - 25 mm HN 25 Concrete nailer 15 - 25 mm

Properties:

  • Weight 2,0 kg
  • Standard snap fitting
  • Cartridge capacity: 100 nails plastic collation
  • Dimensions: 306 x 81,6 x 306 mm
  • Work pressure: 15 to 23 Bar
  • Air usage: 2 litre per stroke at 23 Bar
  • Triger-blocking system
  • Depth adjustable
  • smart contact arm system

    Applications, in confirming:
  • metal profiles on concrete
  • metal profiles on walls (concrete, calcium cilicate, brick)
  • Floor heating and electro-brackets.