Protective packaging materials
With the Contimeta edge board, goods can always be well protected against damage, shocks and bumps. Due to developments and new forms of corner protection, your goods are protected even better. Thus you can prevent damage through the use of cling wrap and/or strapping strips.Our hoekboard« also ensures that the quality of your product is not negatively affected. During transport, you will achieve greater stabilization with heavy loads by means of column stacking. This ensures safe and stable palletising at a very low cost.
Corner profiles protect the vulnerable corners and edges when bundling products or when stabilising pallet loads, but also during storage and transport. They also enable higher vertical piling for more efficient storage. Corner profiles are often applied in combination with strapping strips or wrapping foil and have the following benefits and properties:
- Protection of the corners and edges of the product or pallet load.
- Creating greater packing units or bundels and higher pallets.
- Protecting boxes when strapping products or pallet load.
- Waterproof and moisture proof finishes for use in cool areas or in (extended) outside storage of products or pallets.
- Available in many sizes and designs. Can be provided with printing or a logo.
Manufactured from an extrusion of pulp residue and PE, these corner profiles are extremely rigid and moisture resistant. Available in paper (Chamois), white or aluminium, these corner profiles offer you the best protection and stabilization with storage and transport, also with heavy loads and pallets.
Manufactured from a laminate of coated paper, these corner profiles are extremely moisture resistant and they are therefore often used in wet and cool areas.
Manufactured from 100% recycled cardboard, these corner profiles offer an environmentally friendly way of product protection. Depending on the thickness, greater rigidity can be acquired.
Corner protectors are used to protect product corners of, for example, doors, frames, casings, profiles, etc. The extensive Contimeta range always offers the correct sizes for your application.
Edge protectors protect your product against cutting in with the use of strapping strips. The shape and size also ensures that the strapping strip is held in the correct position during strapping.
Length: from 500 mm
Thickness: 2, 2,5, 3, 3,5, 4 mm
Angle: 90? and 120? (trapezoid model)
Size of wing and basis: depending on the paper-
Paper width: 80, 90, 110, 130, 140, 150, 173, 190, 220 mm. Other sizes available upon request, in massive and cardboard.
Length: 6.000 mm
Wing: available in: 35 x 35 - max. 140 x 70
Thickness: available in: 1,5 - 2,8 mm
Size wing and basis: depending on the paper available on roll and/or length.
This PE-material is 100% recyclable and can amongst other be used as separation or as protection of goods to be packed.
Available in various sizes, both on roll as well as per unit. Also available in narrow strips.
Per unit, Contiload
Length: min. 200 mm, max. 2500 mm
Width: min. 200 mm, max. 1200 mm
Thickness: 1,5 - 4 mm per 0.5 mm
Thickness PAP: 1.5, 2, 2.5 mm
On roll, Contiload
Length: min. 20 meter, max. according to weight
Width: min. 400 mm, max. 1200 mm
Thickness: 1,5 and 2 mm.
Conticrate is a patented system, manufactured from strips of glued cardboard. Ideal for the storage and transport of oblong products. Light and easy to assemble. This 100% environmentally friendly product also contributes to the safety of the user. It consists of 2 elements, namely a base and a lid that fits each other perfectly. Afterwards, it can be wrapped. The rigidity of a glued Conticrate is identical to that of a glued wooden crate. Thanks to this rigidity, one can pack either a heavy axle, or an extremely fragile glass tube.