Shrink film is often used to wrap individual products or when bundling multiple products together. The dimensions and the nature of the to be packaged products can be very diverse. Therefore the type of film and the type of shrink wrapping machine to be used is also very diverse. The film, the shrink wrapping machine and the product to be packaged need to be closely matched.
The shrink process is always done in two parts: First the film is laid around the product and then due to the heating process, melts around the product. For the application of foil, there is a wide range of solutions available. Determining factors are product characteristics, capacity and the type of film to be processed. For the second step of the process, the shrinking itself, there is also a wide variety of solutions available. Sometimes the two processes are combined within one machine. On our website and in our catalogue only a small sample of these solutions are shown.
Packaging machine where the foil sealing/cutting unit is integrated in the cap of the shrink oven. Ideal for small users who now and then need to shrink something under polyolefin or PVC-foil. Available in 3 different sizes: small, medium and large.
A Shrink-wrap bundle packaging machine where a roll of PE-foil lies below and the operator himself wraps the parcel in plastic, cuts the foil and then feeds it through to the shrinking tunnel situated at the back. Simple basic model for low capacities.
The machine can be automated further, if necessary.
When you want to shrink a product after it is covered with shrink wrap, you must use a shrinking tunnel.
Contimeta avails over a wide variety of high performance units.
Semi-automatic shrinking system with a separate sealing bar and tunnel. Suitable for a somewhat faster application, because the shrinking and sealing is separate from one another. Works perfectly with double folded polyolefin or PVC-foil.
Available in 3 different sizes: 5040 M, 6050 M and 8060 M, where the 2 numbers refer to the size of the sealing bar.
A semi-automatic shrinking system with a separate sealing bar and tunnel. Suitable for a somewhat faster application, because the shrinking and sealing is separate from each other. With the A-version the sealing bar works automatically via a foot pedal, pushbutton or timer switch. Opening and closing of the sealing bar takes place pneumatically. Works perfectly with double folded polyolefin or PVC-foil.
3 different sizes: 5040 A, 6050 A and 8060 A, where the 2 numbers refer to the size of the sealing bar.
A fully automatic shrinking system, with a separated sealing bar and tunnel but combined in a single unit. Very compact and easily movable. In this unique machine, the product enters automatically via a feeding belt into the angled sealer to then be shrunk in the shrinking tunnel. Works perfectly with double folded polyolefin or PVC-foil. Also for PE-foil.
2 different sizes: 5545 and 6555 (the 2 numbers refer to the size of the sealing bar).
Completely PLC controlled and very user friendly thanks to the touch screen.
Capacity: 30 to 35 packs/min.
Fully automatic shrink wrapping machine with a continuous sealing system. Very compact and easily movable. The term "CS" represents "Continuous Sealing". The technology consists of a frontally situated diagonal sealing bar for sealing and cutting of the head and tail pieces where a "sealing wheel" fitted sideways takes care of the sideways sealing and cutting. Thanks to this technology you are no longer limited by the product length you want to pack. Works perfectly with double folded polyolefin or PVC-foil. Also for PE-foil.
2 different sizes: 450 and 550 (the 2 numbers refer to the width of the front diagonal sealing bar).
Completely PLC controlled.
Very user friendly thanks to a touch screen.
Capacity: 50 to 65 packs/min.
Tunnel must be purchased optionally and is separate from the CS.
A fully automatic shrink wrapping machine for large products. Specifically for the timber industry. With numerous automated solutions for different sizes conveyed in line. Ideal for the packaging of windows, doors, panels, furniture kits, cupboards, beds, mattresses, etc. This shrink wrapping machine is custom made, depending on your requirements.
The tunnel is lined up with the shrink wrap packaging unit.
On the images, the machinery is positioned one under the other.