This is a print preview of the page.

Netherlands
+31(0)30 2484848
Belgium
+32(0)9 2530509
E-mail
info@contimeta.com

Strapping equipment manual no seals

Specific hand held tools, which can be operated manually or semi pneumatically, are required for processing steel straps. Another differentiation exists in processing steel strapping with seal or seal free. When using seals, separate tensioners and sealers can be used or combi equipment that have both functions integrated in one device. Bundling, tightening and cutting can be done using seal free manually operated equipment.The connection between the steel strapping takes place after tightening by special notches in the steel strapping hooking into each other, after which the strap is cut off. This confirmation method is suitable for applications where the steel strapping is only subjected to stretching (and therefore no volume reduction of the package). In (semi) pneumatic devices, the securing (and notching) is carried out using air pressure. This is less tiring for the operator, improves the efficiency and provides a uniform way of bundling (equal strap tension).

Contispan manual

Contispan manual

Hand held equipment for manually securing seal-free splicing of all kinds of steel strapping up to 0.63 mm thickness. Due to the cutting motion of the splicing cutters, this device is light to use and the knives last longer.

Available for strapping widths of 13, 16 and 19 mm.

Strapper steel strapping JK 1219

Strapper steel strapping JK 1219

Hand held equipment for manually securing seal-free splicing of all kinds of steel strapping up to 0.63 mm thickness.

Simple to change settings between 13, 16 or 19 mm.

Contispan semi-automatic

Contispan semi-automatic

Hand held equipment for the pneumatic securing and seal free closing of all kinds of steel strapping of 0.5 tot 0.8 mm thickness for automatic straps and up to 0.63 mm thickness for Megaband or Megaflexband.

Available for strapping widths of 13, 16 and 19 mm.

Contispan fully automatic

Contispan fully automatic

Hand held equipment for the pneumatic securing and seal free closing of all kinds of steel strapping of 0.5 tot 0.8 mm thickness for automatic straps and up to 0.63 mm thickness for Megaband or Megaflexband.

Available for strapping widths of 13, 16 and 19 mm.